UYGULAMA ALANLARI
Her alan,
zeminden farklı
bir performans
ister.
Scientific Floor ürün aileleri, farklı sektörlerin hijyen, dayanım, kimyasal direnç, iletkenlik, trafik ve bakım ihtiyaçlarına göre seçilir.
SEKTÖRE GÖRE ÇÖZÜMLER
Sekiz uygulama alanı.
Her alan kendi kullanım koşuluna göre farklı ürün ailesi veya sistem kombinasyonu gerektirir.
Industrial Floors
Floor systems that jointly address heavy rack load, forklift traffic, abrasion and joint durability in production, warehouse and logistics areas.
Food Industry
Non-porous coating systems that jointly meet HACCP hygiene, thermal-shock resistance, chemical resistance and R11–R12 slip resistance.
Parking Areas
Water-proofing and surface protection with EN 1504-2 OS8/OS11 traffic and crack-bridging systems in multi-storey, indoor and outdoor car parks.
Laboratories
<p>In pharmaceutical, chemical and technical laboratories the floor must combine resistance to aggressive reagents with static-charge control on the same surface.</p><ul><li>Broad-spectrum chemical and solvent resistance</li><li>Conductive / static-dissipative surface (ESD, 10⁶–10⁹ Ω)</li><li>Non-porous, liquid-tight and decontaminable surface</li><li>Seamless coved skirting and spill-containment details</li><li>Low particle shedding (clean-room compatible)</li></ul><p>In a laboratory the floor must behave in a controlled way against both chemical spills and static electricity: aggressive reagents must not dissolve the surface, and accumulated static charge must not disturb sensitive instruments or experiments. Scientific Floor combines chemical resistance with controlled conductivity in the 10⁶–10⁹ Ω range in one system, delivering a decontaminable, clean-room-compatible surface.</p>
Medical Areas
Seamless, coved, liquid-tight and disinfectant-resistant hygienic surfaces in hospitals, operating theatres and clinics.
Decorative Floors
Floors that combine quartz/flake texture, gloss-to-matte finish and UV stability with durability in showrooms, stores and corporate spaces.
Conductive Floors
<p>In electronics manufacturing, technical laboratory and explosive-atmosphere areas the floor must drain static to earth in a controlled, safe way rather than eliminate it.</p><ul><li>Earthed ESD control (2.5×10⁴–10⁶ Ω system resistance)</li><li>Equipotential grounding grid via copper earthing tape</li><li>Electronics manufacturing, ATEX / explosive-atmosphere safety</li><li>Sensitive-equipment protection through controlled static discharge</li><li>Compliance with IEC 61340-5-1 static-control practice</li></ul><p>On a conductive floor the aim is not to eliminate static but to drain it to earth in a controlled, safe way: in electronics assembly a single discharge can destroy a board, and in an ATEX area a spark is a hazard. With a copper grounding grid Scientific Floor installs a certified conductive coating in the 2.5×10⁴–10⁶ Ω range, keeping discharge within a measurable limit.</p>
WHG Floors
<p>In areas with a chemical or liquid-pollutant risk the floor must be a certified barrier that contains leaks, providing chemical resistance and documentable impermeability together.</p><ul><li>WHG / AwSV (German Water Resources Act) compliant system</li><li>Liquid-tight, certified containment</li><li>Resistance to aggressive chemicals and solvents</li><li>Environmental protection with bund / barrier detailing</li><li>Non-porous structure with a documentable system certificate</li></ul><p>WHG floors are a direct subject of water- and environmental-protection legislation: in a chemical storage, filling or processing area the floor must be a certified barrier that contains any leak. Not only chemical resistance but documentable impermeability is required. Scientific Floor certifies liquid-tightness and chemical resistance together with tested, WHG/AwSV-compliant systems.</p>
Hijyen
Kimyasal direnç
İletkenlik